Products

Various sizes from 4” and up in imperial & metric

Various patterns available as shown

Available various size starting from 4”, available in metric & imperial.

• Available in ONLY Dulux Colourbond colours

www.dulux.com.au/colour/colorbond/
*Colourbond Nightsky (pictured)

• Various sizes 3”, 5” & 6” (in stock)
• Other sizes available on request (subject to availability)
• Maximum 4 metres long

Various sizes from 100mm and up in matric and imperial

• Various sizes from 4” and up in imperial & metric
• Available in Stainless 304 steel and Galvanised steel
• Also Available in Single, Double or Triple skin.

• Various sizes from 4” and up in imperial & metric
• Available in Stainless 304 steel and Galvanised steel
• Also Available in Single, Double or Triple skin.

• Various sizes from 6” and up in imperial & metric
• Available in Slotted, Club & Round, Herringbone and Solid

• Standard is 45deg and 90deg, but other angles can be made upon request.

• Various angles and lobster back
• Correct Image
• Any Manuals

Various sizes from 100m and up in matric and imperial. Available colour (Dulex colour bond only)

Various sizes from 100m and up in matric and imperial. Available colour (Dulex colour bond only)

• Shed kits are 2.7mtrs long and designed for when you only need a double skin (not a triple skin) to go through the roof, Ideal for sheds and patios.
• Available in various diameters

What’s included:

3 x Active Flue 900mm long (stainless 304 steel)

1 x Outer casting 900mm long (Galvanised)

1 x Cowl *Your choice out of a Chainman’s or Anit-Down Drought, also out of stainless steel or galvanized.

Wall penetration kit is designed for most structure where the flue needs to penetrate through the wall at any angle (not greater than 45 degrees) to vent up through the eves to the roof.
Available in various diameters

What’s included:

1 x Default 750mm long (painted)

1 x Inner skin 750mm long

1 x Active skin 900mm long

1 x Triple skin slip bends.

2 x Pitched plates (1 painted)

*45 Degree wall penetration kit pictured

Note:

Perforated Flue & Bends must be ordered separately with colour & pattern to be specified.

Wall penetration kit is designed for most structure where the flue needs to penetrate through the wall at any angle (not greater than 45 degrees) to vent up through the eves to the roof.
Available in various diameters

What’s included:

1 x Default 750mm long (painted)

1 x Inner skin 750mm long

1 x Active skin 900mm long

1 x Triple skin slip bends.

2 x Pitched plates (1 painted)

*45 Degree wall penetration kit pictured

Note:

Perforated Flue & Bends must be ordered separately with colour & pattern to be specified.

The Ceiling to Floor penetration is to design for double storey structure when you need to go through one level to the other.
Available in various diameters

What’s included:

1 x Default 750mm long (painted)

1 x Inner skin 750mm long (attach with the default).

1 x Active skin 900mm long

2 x Ceiling Rings (both painted)

Note:

Perforated Flue & Bends must be ordered separately with colour & pattern to be specified.

• The ADD cowl is designed to eliminate most of the down draught in some weather conditions and in windy areas.
• It is fitted with band/collar around the outside of the cowl to deflect the wind & rain away from the outlet.
• Available in Stainless 304 Steel & Galvanised
• Available various size starting from 4”, available in metric & imperial.

• This is a standard cowl is design to vent the smoke from the fireplace outside and to stop most of the rain from coming down the outlet.
• Available in Stainless 304 Steel & Galvanised
• Available various size starting from 4”, available in metric & imperial.

• The FireZone ADD cowl is designed for BAL (Bushfire Attack Level) rating areas FZ & below.
• Also to eliminate most of the down draught in some weather conditions and in windy areas.
• It is fitted with band/collar around the outside of the cowl to deflect the wind & rain away from the outlet.
• Available in Stainless 304 Steel
  Available various size starting from 4”, available in metric & imperial.

• The design of this cowl is to ensure that no matter what the wind direction or strength the flue or chimney is protected from down draught. As the wind passes down the top of the external parts, it creates a wind flow that exhausts the smoke and fumes out of the lower exits.
• Only available in Stainless 304 Steel

• This cowl is designed to help when smoke from your heater is a problem. This can happen if a nearby object is blocking the normal air flow across the top of the cowl, which can result in wood smoke congregating around the flue area instead of dissipating vertically.
• Available various size starting from 4”, available in metric & imperial.
• Only available in Stainless 304 Steel

• Design to go on single skin flue, e.g. pizza ovens.
• Comes in various size starting from 4”, available in metric & imperial.
• Choice of style, an Anti-Down Draught Cowl (ADD) / Chainman’s Hat
• ONLY made from stainless 304 steel

AGA approve gas cowl used to terminate the gas flue coming from the gas appliance, it is NOT design for wood heating appliances.

• Comes in various sizes 4”, 5” & 6”.

• Directional bird cowls are designed to shift position in relation to wind direction as the wind turns the cowl in the opposite direction. This creates a vacuum which can increase the drought of the chimney and assist with back flow, in same situation.
• Available various size, please call to discuss.
• ONLY made in Stainless 304 Steel.

• Adaptors are need when you transition from one size to another size e.g. 4” to 6”. When ordering adaptors please make sure that you tell us which end is the heater/crimped end.

• This 45-degree offset is design to be as shallow as possible, for those hard to get too places.
• Available various size (mainly in 6”), please call to discuss if a different size is needed.
• ONLY made in Stainless 304 Steel.

• This 90-degree offset is design to be as shallow as possible, for those hard to get too places where you need to go straight.
• Available various size (mainly in 6”), please call to discuss if a different size is needed.
• ONLY made in Stainless 304 Steel.

• The adaptor goes into the heater end and over the flexi flue.
• Come in various Diameters.
• ONLY made in Stainless 304 Steel

• The Square, Rectangle & Oval to Round adaptors are made for adapting the spigot of the heater to standard round flue sizes.

• The Square, Rectangle & Oval to Round adaptors are made for adapting the spigot of the heater to standard round flue sizes.

• Is another option for a ceiling trim, they can be used on a flat or any angled ceiling, they are used to create a modern finish on your ceiling.

• Ceiling plates are fixed to the ceiling via a hole in each of the corners.
• They can be raw or painted in a stove bright paint same colour as the flue kit.
• Come in various Diameters.
• Made from galvanised steel or stainless 304 steel (on request)

• The adjustable plates come in 2 pieces, so you install at a later date.
• It adjusts from 0 degrees to 45 degrees.
• They can be raw or painted in a stove bright paint same colour as the flue kit.
• Come in various Diameters.
• Made from galvanised steel or stainless 304 steel (on request)

• Standard angles are 22.5, 30, 45 degrees.
• Come in various Diameters.
• If different angle is required ???need help with wording?
• They can be raw or painted in a stove bright paint same colour as the flue kit.
• They can be raw or painted in a stove bright paint same colour as the flue kit.

Various sizes from 100m and up in matric and imperial. Available colour (Dulex colour bond only)

Various sizes from 100m and up in matric and imperial. Available colour (Dulex colour bond only)

Various sizes from 100m and up in matric and imperial. Available colour (Dulex colour bond only)

Various sizes from 100m and up in matric and imperial. Available colour (Dulex colour bond only)

• Chimney plates are designed to create a double skin to fit on top the old brick chimney to waterproof when in combination with a cowl.
• Made in stainless 304 steel ONLY.
• Come in various diameters.
• Plate size 380mm x 380mm standard.

• Is an infill panel that give an inbuilt heater a clean-cut modern look around the fireplace.
• Made from 1.6mm Zinc sheet.
• Can be 3 or 4 sided and various sizes please call to double check.
• They come painted in a stove bright paint same colour as the heater.

• Design so you can go horizontal and vertical with your flue system, it also comes with an inspection cap so you can easily clean the active skin.
• They come as a single skin (stainless 304 steel) or as double, triple skin.
• Come in various diameters.